Fasteners

NEW! Special "PROFESSIONAL" insert nut with optional M10 flange nuts for fastening with chipboard screws. To meet high and stringent safety standards...

Zinc-plated T-nut M10. T-nuts are needed for mounting climbing holds on a wooden wall. The T-nuts function as...

Alloyed tool steel, centering tip with cutting geometry, two offset fluted main cutting edges and the toothed, longitudinally grooved...

M10 EXPERT STAINLESS STEEL T-nut Are you planning an outdoor climbing wall that will withstand professional use? Then...

INOX GARD Stainless Steel Assembly Paste 40g Pen The white INOX Gard assembly paste is a high-quality, high-pressure and high-temperature resistant anti-corrosion paste...

Stainless steel T-nuts M10 x 13 mm. T-nuts are needed for mounting climbing holds to a wooden wall. The T-nuts...

M10 zinc-plated cylinder head screw, steel, blue zinc-plated, cylinder head, with internal hexagon drive, strength class 8.8, with shank, standard DIN 91...

This completely redesigned Professional 2.0 size 8 hex key is specifically tailored to the needs of climbers. Advantages of this...

Cylinder head screw M10 stainless steel Options: Length: 30-80mm Quantities: 1 or 50

Hammer drill bit with SDS-PLUS shank, fits all standard impact drills and rotary hammers with SDS chuck, chisel-shaped drill bit...

M10 drive-in anchor: The best solution for a climbing wall where the climbing holds are to be attached directly to the concrete wall. Drilling depth [mm] ...

Internal thread sleeve M10 x 80 mm. The internal thread sleeve has building authority approval. The internal thread sleeve has an outer diameter of 14 mm. ...

Setting tool for M10 drive-in anchors. The setting tool is required to anchor the drive-in anchor in the drilled hole. How a drive-in anchor works:...

Zinc-plated screw-in nut M10. Screw-in nuts are needed for mounting climbing holds to a wooden wall. The screw-in nuts function...

Countersunk screw M10, zinc-plated steel, blue zinc-plated, countersunk head, with internal hexagon drive, strength class 10.9, without shank. Standards DIN 7991,...

Hex key "Professional 2.0" size 6 Advantages of this wrench at a glance: Easy handle attachment due to the good grip...

Countersunk screw, stainless steel M10, stainless steel A2, countersunk head, with internal hexagon drive (SW), with or without shank. Standards: DIN 7991, ISO 10642 O...

Countersunk screw, stainless steel M10, length 30 mm, stainless steel A2, countersunk head, with internal hexagon drive, without shank. DIN 7991, ISO 10642, BN 210...

Countersunk screw, stainless steel M10, length 40 mm, stainless steel A2, countersunk head, with internal hexagon drive, without shank. DIN 7991, ISO 10642, BN 210...

Countersunk screw, stainless steel M10, length 50 mm, stainless steel A2, countersunk head, with internal hexagon drive, without shank. DIN 7991, ISO 10642, BN 210...

Countersunk screw, stainless steel M10, length 60 mm, stainless steel A2, countersunk head, with internal hexagon drive, without shank. DIN 7991, ISO 10642, BN 210...

Countersunk screw, stainless steel M10, length 70 mm, stainless steel A2, countersunk head, with internal hexagon drive, without shank. DIN 7991, ISO 10642, BN 210...

Countersunk screw M10, zinc-plated, 40 mm length, steel, blue zinc-plated, countersunk head, with internal hexagon drive, strength class 10.9, without shank. DI...

Countersunk screw M10, zinc-plated, 50 mm long, steel, blue zinc-plated, countersunk head, with internal hexagon drive, strength class 10.9, without shank. DIN...