Create your climbing wall

Your climbing wall is just a few clicks away. To get closer to your goal, you can fill out the form below and see an instant cost estimate. Further information about building a climbing wall can be found below the form.

We deliver your climbing wall and, if required, assemble it directly on site.

What type of wall do I need?

• For indoor use: 18/21 mm plywood sheets
• For outdoor use, screen printing plates 18/21 mm

Do I need a wooden grid system?

• With a wall made of a wooden structure, you can mount directly onto the subwall
• For a concrete or brick wall, we recommend a wooden grid behind the wall 

Do I need mounting hardware?

• Indoors, a galvanized T-nut is needed every 20 cm (20 cm x 20 cm grid)
• Stainless steel T-nuts are required for outdoor use
• The screw length is correct if it protrudes 2 cm from the handle 

How many and what kind of climbing holds do I need?

• Normal wall 7-8 handles per M2
• Boulder wall: 10-12 holds per M2 
• Wall for advanced climbers: 18-25 holds per m² 
• Handle grips in size M/L are suitable for beginners
• For advanced climbers, we have slopers, crimps and pinches in many sizes. 

Which soft landing mat do I need?

• Fall protection mats should extend 2 m in front of the wall to cover the floor (depth dimension)
• They should be half a meter wider on both sides than the wall (width measurement)
• For wall heights up to 2.50 m, we recommend a thickness of 20 cm. Our tested mats have the dimensions: depth 200 cm, width 150 cm, thickness 20 cm.
• For wall heights up to 3.00 m, we recommend a thickness of 30 cm. Our tested mats have the dimensions: depth 200 cm, width 150 cm, thickness 30 cm.